HP ProLiant DL100 G2 Data Protection Storage Server administration guide (June 2006)

3 Remote access, monitoring , and
set up com pletion
This chapter describes basic administrative p rocedures related to remote access and monitoring and
completes the setup procedures that were started in the HP ProLiant Data Protection Storage Ser ver
installation guide that comes with your server.
Remote Browser
This method of remote access allows you to place a DHC P-enabled storage ser ver on a DHCP-enabled
network and b rowse to the server. Knowing the serial number of the storage server and its IP address,
you can log in to a network port. Instructions for setting up Remote Browser are explained in the HP
ProLiant Da
ta Protection Storage Server installation guide that is provided with the server.
Connecting to the storage server permits you to access the HP Data Protection Storage Server
Management console. From the console, you can access snap-ins that allow complete server system
management
.
Figur
e11HPDataProtectionStorageServerManagementconsole
Remote Desktop through the HP Data Protection Storage
Server Management console
Remote Desktop provides the ability for you to log on to and r emotely administer your server, giving you
a method of managing it from any client. Installed for remote administration, Remote Desktop allows only
two concurrent sessions. Leaving a session running takes up one license a nd can affect other users. If
two sessions are running, additional users will be denied access.
HP ProLiant DL100 G2 Data Protection Storage Server 31