HP ProLiant DL100 G2 Data Protection Storage Server administration guide (June 2006)

Figure22Tightenreartopcoverscrew
Backplane ba
ttery
CAUTION:
Remove power to the server by disconnecting the power cord before removing or installing the backplane
battery.
Refer to Figure 23 for the location of the battery on the backplane.
Figure 23 Ba ckplane battery location
To remove the backplane bat tery:
1.
Remove the rear top cover (see "Rear top cover"onpage45).
2. Pull the battery retaining clip away from the batter y.
Figure 24 Removing bac kplane ba t tery
3. Lift the batter y on the lever side and pull it out of the holder.
46
Troubleshooting, servicing, and maintenan ce