HP ProLiant DL100 G2 Data Protection Storage Server administration guide (June 2006)

Figure 31 Location of power supply
To remove a power supply:
1.
Remove the rear top cover (see "Rear top cover"onpage45).
2. Unplug the power supply cables connected to the backplane and motherboard.
Figure 32 Power supply cables
P1 Main power c onnector
P4 Not used
P2 Processor power connector
P5/P6 Hard disk drive power connectors
P3 Backp
lane power connector
3. Remove the four screws securing the power supply to the chassis.
50
Troubleshooting, servicing, and maintenan ce