HP ProLiant DL100 G2 Data Protection Storage Server administration guide (June 2006)

6 System install ation and recovery
This chapter describes how to use the System Installation and Recover y DVD that is provided with your
storage server.
The System Installation and Recovery DVD
The HP P roLiant Storage Server System Installation and Recovery DVD allows you to install an image or
recover from a catastrophic failure. The DVD is used initially to install and configure the operating system
and applicat
ions provided with your storage ser ver.
At any later t
ime, you may boot from the DVD and restore the server to the factory condition. This allows
you to recover the system if all other means to boot the server fails.
While the recovery process makes every attempt to preserve the existing data volumes, you should have
a backup of your data if a t all possible before recovering the system.
To restore a factory image
1. Connect keyboard, monitor, and mouse directly to the storage server.
2. Inser t the System Installation and Recovery DVD and bo ot the storage ser ver. As the server boots
from the DVD, the main window appears.
Figure 48 System Installation and Recovery window
3. Choose Restore Factory Image. On systems with only two physical drives, you are asked if you want
to do a complete restore of the system to factory condition (which destroys all user data), or if you
want to restore only the operating system and retain the user data volume.
HP ProLiant DL100 G2 Data Protection Storage Server 5 9