3.7.0 HP StorageWorks HP Scalable NAS File Serving Software upgrade guide HP Scalable NAS for Linux (AG513-96005, October 2009)

12. Install the FS Option for Linux support RPM from the product CD or the location
where you have downloaded the software.
# rpm -i <mountpoint>/mxfs-<os>-support-3.7.0-<xxxx>.<arch>.rpm
13. Install the FS Option for Linux product RPM from the CD or the location where
you have downloaded the software.
# rpm -i <mountpoint>/mxfs-3.7.0-<xxxx>.<arch>.rpm
14. Install the Management Console and mx utility.
# rpm -i <mountpoint>/mxconsole-3.7.0-<xxxx>.<arch>.rpm
15. Install the quota tools RPM if desired.
# rpm -i <mountpoint>/pmxs-quota-tools-3.13-<xxxx>.<arch>.rpm
16. Install the Performance Dashboard RPM if desired.
# rpm -i <mountpoint>/mxsperfmon-3.7.0-<xxxx>.<arch>.rpm
17. Load the HP Scalable NAS default HBA driver and verify that the server has
access to the SAN storage. Run the following command to load the driver:
# /etc/init.d/pmxs load
18. Run the following command to see a list of devices. Review the output to verify
that the SAN is configured as you expect.
# cat /proc/partitions
19. Import the cluster configuration from the node that was upgraded first:
# mx config import <server_upgraded_first>
HP Scalable NAS File Serving Software upgrade guide 29