3.7.0 HP StorageWorks HP Scalable NAS File Serving Software upgrade guide HP Scalable NAS for Linux (AG513-96005, October 2009)

The Add Bookmarks dialog appears next. Specify a name for the cluster
and click OK.
f. Add all of the remaining servers to the bookmarked cluster, including the
servers in the low IP group. On the HP Scalable NAS Connect window,
enter the hostname for the next server, click the As User button, and then
specify the root user and password and click Add to bookmarks and
Remember this password on the Authentication Parameters dialog. When
you click OK, the Add Bookmark dialog will allow you to add the server to
the bookmarked cluster. Repeat this step for each additional server.
g. Click Cancel on the HP Scalable NAS Connect window and then save the
new bookmark when you are prompted to do so.
h. The .matrixrc file is placed at /root/.matrixrc on the server where
it was created. Copy the file to this location on the other servers in the high
IP group.
7. Re-enable the servers:
mx server enable <server1> <server2> ...
8. Reboot the servers.
HP Scalable NAS File Serving Software upgrade guide 57