HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Administration Guide (403103-005, January 2008)
Table Of Contents
- Contents
- HP Technical Support
- Quick Start Checklist
- Introduction to HP Clustered File System
- Cluster Administration
- Administrative Considerations and Restrictions
- Tested Configuration Limits
- Volume and Filesystem Limits
- User Authentication
- Start the Management Console
- Cluster Management Applications
- The HP CFS Management Console
- View Installed Software
- Start HP Clustered File System
- Stop HP Clustered File System
- Back Up and Restore the Cluster Configuration
- HP Clustered File System Network Port Numbers
- Configure Servers
- Configure Network Interfaces
- Configure the SAN
- Configure Dynamic Volumes
- Configure PSFS Filesystems
- Manage Disk Quotas
- Manage Hardware Snapshots
- Configure Security Features
- Configure Event Notifiers and View Events
- Overview
- Install and Configure the Microsoft SNMP Service
- Cluster Event Viewer
- Configure Event Notifier Services
- Select Events for a Notifier Service
- Configure the SNMP Notifier Service
- Configure the Email Notifier Service
- Configure the Script Notifier Service
- View Configurations from the Command Line
- Test Notifier Services
- Enable or Disable a Notifier Service
- Restore Notifier Event Settings to Default Values
- Import or Export the Notifier Event Settings
- Using Custom Notifier Scripts
- Cluster Operations on the Applications Tab
- Configure Virtual Hosts
- Configure Service Monitors
- Configure Device Monitors
- Advanced Monitor Topics
- SAN Maintenance
- Other Cluster Maintenance
- Management Console Icons
- Index
Chapter 10: Manage Disk Quotas 122
When you create a PSFS filesystem, you can specify whether quotas
should be enabled and you can set quota options on the filesystem. (See
“Create a Filesystem” on page 99.)
Quotas can also be enabled or disabled on an existing filesystem, using
either the HP CFS Management Console or HP Clustered File System
commands. The filesystem will be unmounted briefly during the
enable/disable operation.
NOTE: The enable/disable features provided with Windows utilities
cannot be used to enable/disable quotas, as those features do not
work with PSFS filesystems. These utilities will report messages
such as “One or more settings were not changed.”
Enable or Disable Quotas on the Management
Console
To enable or disable quotas on an existing filesystem, locate the filesystem
on the Management Console, right-click, and select Properties. Then go to
the Quotas tab on the Properties dialog.