HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Administration Guide (403103-005, January 2008)

Chapter 13: Configure Event Notifiers and View Events 151
The Microsoft SNMP service is required. See “Install and Configure
the Microsoft SNMP Service” on page 151 for more information.
• Email Notifier Service. This service sends email to specified
addresses when the selected events occur.
• Script Notifier Service. This service allows you to specify a script that
will be triggered when selected events occur. If you configured
notifiers in previous releases of HP Clustered File System, you can use
this service to recreate the notifiers.
You will need to configure the services that you want to use with your
cluster. The event notifier configuration is saved in the mxds datastore
and will be included when you back up the datastore.
Install and Configure the Microsoft SNMP
Service
The HP Clustered File System SNMP service provides an SNMP
extension agent and MIBs for retrieval of all cluster-wide state and status
information. HP Clustered File System also provides an SNMP notifier
service that can send HP Clustered File System events as SNMP traps.
To use the HP Clustered File System SNMP service, the Microsoft SNMP
service must be installed and configured on all nodes in the cluster. This
service is included in the Microsoft Windows 2003 distribution; however,
it is not automatically installed. To perform the installation, complete
these steps:
1. Open the Control Panel and select Add or Remove Programs.
2. Double-click Add/Remove Windows Components. On the Windows
Components Wizard, select Management and Monitoring Tools and
click Details.
3. On the Management and Monitoring window, select Simple Network
Management Protocol and click OK and then click Next on the
following window.
4. Insert the Windows 2003 CD or specify the location of the files. The
Wizard will now install the software.