HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Administration Guide (403103-005, January 2008)

Chapter 13: Configure Event Notifiers and View Events 161
To Email address. Type the email addresses to which event notifier email
should be sent. If multiple addresses will be specified, use semicolons to
separate the addresses.
Subject line. Select the amount of information that will appear in the
Subject line of the email. The options are short, medium (the default), and
long:
• Short. Includes only the event severity indicator, for example:
Subject:[ERROR]
• Medium. Includes the event severity indicator and the event message,
which is truncated at 78 characters. For example:
Subject:[ERROR] Process mxlogd did not signal startup completion
within the configur...
• Long. Includes the event severity indicator and the entire event
message. For example:
Subject:[ERROR]Process mxlogd did not signal startup completion
within the configured 5000 millisecond interval. Proceeding to
next process anyway.
Omit cluster description. By default, the cluster description assigned to
the cluster appears in the source address for the email. For example, if the
cluster description is Cluster X and the --from <email address> is
[e-mail], the source address for the email will be Cluster X
[[e-mail]]. When the Omit cluster description option is
checked, the cluster description does not appear in the source address. In
our example, the source address will be [e-mail].
SMTP Configuration. Enter the name or IP address of the SMTP server.
Also specify the port to be used.
Credentials. If the SMTP server requires credentials, type the appropriate
user name and password.
Disable the Email notifier service. This checkbox can be used to enable
or disable the service as necessary.
After configuring the service, you can test it by clicking Send Test
Message.
To configure the service from the command line, use this command: