HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Administration Guide (403103-005, January 2008)
Table Of Contents
- Contents
- HP Technical Support
- Quick Start Checklist
- Introduction to HP Clustered File System
- Cluster Administration
- Administrative Considerations and Restrictions
- Tested Configuration Limits
- Volume and Filesystem Limits
- User Authentication
- Start the Management Console
- Cluster Management Applications
- The HP CFS Management Console
- View Installed Software
- Start HP Clustered File System
- Stop HP Clustered File System
- Back Up and Restore the Cluster Configuration
- HP Clustered File System Network Port Numbers
- Configure Servers
- Configure Network Interfaces
- Configure the SAN
- Configure Dynamic Volumes
- Configure PSFS Filesystems
- Manage Disk Quotas
- Manage Hardware Snapshots
- Configure Security Features
- Configure Event Notifiers and View Events
- Overview
- Install and Configure the Microsoft SNMP Service
- Cluster Event Viewer
- Configure Event Notifier Services
- Select Events for a Notifier Service
- Configure the SNMP Notifier Service
- Configure the Email Notifier Service
- Configure the Script Notifier Service
- View Configurations from the Command Line
- Test Notifier Services
- Enable or Disable a Notifier Service
- Restore Notifier Event Settings to Default Values
- Import or Export the Notifier Event Settings
- Using Custom Notifier Scripts
- Cluster Operations on the Applications Tab
- Configure Virtual Hosts
- Configure Service Monitors
- Configure Device Monitors
- Advanced Monitor Topics
- SAN Maintenance
- Other Cluster Maintenance
- Management Console Icons
- Index
Chapter 17: Configure Device Monitors 213
Add or Modify a Device Monitor
Select the appropriate option from the HP CFS Management Console:
• To add a new device monitor, select the server to be associated with
the monitor from the Servers window, right-click, and select Add
Device Monitor (or click the Device icon on the toolbar). Then
configure the device monitor on the New Device Monitor window.
• To update an existing device monitor, select the monitor on the
Servers window, right-click, and select Properties. Then make your
changes on the Device Monitor Properties window.
Device Name: Type the name of the device monitor. You can use up to 32
alphanumeric characters.
NOTE: This field does not appear if you are creating an NTSERVICE
monitor. Instead, you will be asked for the name of the NT service
that you want to monitor.
Application name: Specify the name of the HP Clustered File System
application to be associated with this device monitor. HP Clustered File
System applications are used to group related virtual hosts, service
monitors, and device monitors on the Applications tab. If you leave this
field blank, HP Clustered File System will use the name of the device
monitor as the application name.