HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Administration Guide (403103-005, January 2008)
Table Of Contents
- Contents
- HP Technical Support
- Quick Start Checklist
- Introduction to HP Clustered File System
- Cluster Administration
- Administrative Considerations and Restrictions
- Tested Configuration Limits
- Volume and Filesystem Limits
- User Authentication
- Start the Management Console
- Cluster Management Applications
- The HP CFS Management Console
- View Installed Software
- Start HP Clustered File System
- Stop HP Clustered File System
- Back Up and Restore the Cluster Configuration
- HP Clustered File System Network Port Numbers
- Configure Servers
- Configure Network Interfaces
- Configure the SAN
- Configure Dynamic Volumes
- Configure PSFS Filesystems
- Manage Disk Quotas
- Manage Hardware Snapshots
- Configure Security Features
- Configure Event Notifiers and View Events
- Overview
- Install and Configure the Microsoft SNMP Service
- Cluster Event Viewer
- Configure Event Notifier Services
- Select Events for a Notifier Service
- Configure the SNMP Notifier Service
- Configure the Email Notifier Service
- Configure the Script Notifier Service
- View Configurations from the Command Line
- Test Notifier Services
- Enable or Disable a Notifier Service
- Restore Notifier Event Settings to Default Values
- Import or Export the Notifier Event Settings
- Using Custom Notifier Scripts
- Cluster Operations on the Applications Tab
- Configure Virtual Hosts
- Configure Service Monitors
- Configure Device Monitors
- Advanced Monitor Topics
- SAN Maintenance
- Other Cluster Maintenance
- Management Console Icons
- Index
![](/manual/hp/hp-dl380-sl-clustered-gateway/hp-storageworks-clustered-file-system-360-windows-storage-server-edition-administration-guide-403103-005-january-2008/images/img-248.png)
Chapter 19: SAN Maintenance 238
mxsanlk
This host: 10.10.30.3
This host’s SDMP administrator: 10.10.30.1
Membership Partition SANlock State
-------------------- -------------
psd1p1 held by SDMP administrator
psd2p1 held by SDMP administrator
psd3p3 held by SDMP administrator
Any of these messages can appear in the “SANlock State” column.
• held by SDMP administrator
The SANlock was most recently held by the SDMP administrator of
the cluster to which the host where mxsanlk was run belongs.
• trying to lock, last held by host X.X.X.X
The SANlock was most recently held by host X.X.X.X and may still be
held by that host. The host on which mxsanlk was run is trying to
acquire the SANlock.
• cannot access
The host on which mxsanlk was run is unable to access the SANlock.
The membership partition may need to be repaired. This message may
also be caused by a LUN masking/zoning/physical problem (for
example, the array may be powered off or the LUN may have been
deleted from the array).
• trying to lock, cannot access
The host on which mxsanlk was run is trying to acquire the SANlock
but is unable to access it. The membership partition may need to be
repaired.
• locked, cannot access
The host on which mxsanlk was run held the SANlock but is now
unable to access it. The membership partition may need repair.