hp e-commerce server accelerator 7100/7120 release notes

HP e-Commerce Server Accelerator SA7100/SA7120

Known Issues

Duplicate IP addresses resulting from

sharing configurations among cascaded

devices.

Device IP addresses are specified in the device’s configuration file,

thus if you employ multiple devices in a cascade and export a

configuration from one to another, both devices will have the same IP

address, a situation that cannot be permitted.

Workaround: Change the receiving device’s IP address while it’s in

bypass mode. Use the following procedure:

1. Verify that the configuration on Device 1 is as you want it.

2. Export Device 1’s configuration file. (Please see the export

config command in Chapter 5 of the User Guide.)

NOTE: You must use the

front panel bypass button.

Do not use the CLI’s

bypass command.

3. Press the bypass button on Device 2’s front panel to put the

machine in bypass mode.

4. On Device 2, import the configuration file you exported from

Device 1 in step 2 above. (Please see the import config

command in Chapter 5 of the User Guide.)

5. Change Device 2’s IP address using the set ip command.

6. Save Device 2’s configuration using the config save command.

7. Press the bypass button on Device 2’s front panel to put the

machine in inline mode.

SNMP “set” command not available.

The device does not support the SNMP manager’s set feature.

Workaround: None.

All ports must be uniquely defined

Uniquely define all ports, including components of mappings, and

those for Telnet, SSH, and SNMP. Failure to do so will prevent

access to one of the services.