HP Traffic Director Server Appliances sa7200/sa7220 and 8200/sa8220 - User Guide

C H A P T E R 5 HP Traffic Director Server Appliances User Guide
148
reset (continued)
GUI Settings:
• Response timeout is set to 30 seconds.
• Broker-action is set to 0 (Policy Manager).
• Server-action is set to 1 (Statistics)
Multi-site Settings:
• MSD port is set to 1999.
Route Factory Settings:
• Role is set to ‘standalone.’
• Protocol is set to ‘none’
• OSPF-area is set to ‘backbone.’
• Hello interval is set to 10 seconds.
• Dead interval is set to 40 seconds.
• RIP version is set to 2.0.
Security Settings:
• acl is cleared.
• custom access-control is disabled.
• custom forwarding is disabled.
• custom ssh is enabled.
• custom telnet is disabled.
• custom gui is disabled.
• custom snmp is disabled.
• custom ms-agent is disabled.
• security mode is set to closed.
SNMP Settings:
•
sysContact is set to a null.
•
sysName is set to the host name of the unit.
•
sysLocation is set to a null.
• Community private string rights set to RW.
• Community public string rights set to RO.
• Auto topology is disabled.
• Port is set to 161.
• Trap port is set to 162.
• All traps are deleted.
Command Description