HP Traffic Director Server Appliances sa7200/sa7220 and 8200/sa8220 - User Guide

C H A P T E R 5 HP Traffic Director Server Appliances User Guide
152
Admin
Commands
The SA8220’s admin commands (see below) specify the server port
where the Graphical User Interface is accessed and verify the current
port.
File
Management
Commands
The File Management commands are described below.
Command Description
config admin info
Displays the current Graphical User Interface (GUI) port
config admin info
config admin port
Sets the Graphical User Interface (GUI) port number. This is the
port where the admin GUI listens for connections. The Admin GUI
allows the user to configure the unit using a graphical user
interface.
config admin port <port>
where port is the GUI http port. You can select any available port
between 1 and 65535. The default is 1095.
Command Description
cat
Displays contents of the specified saved configuration file.
cat {filename}
where filename is the name of the file to be displayed. If not
specified, the file
default.cfg is displayed.
copy
Copies an existing configuration file to a new file.
copy <source> to <destination>
where source is the name of the original file and destination
is the name of the target file.