HP Traffic Director Server Appliances sa7200/sa7220 and 8200/sa8220 - User Guide

C H A P T E R 5 File Management Commands
153
dir
Displays a list of saved configuration files
dir
get
Retrieves a configuration file from a TFTP server. Because the
TFTP protocol has no user-logon or validation, sites that support it
typically enforce some file access restrictions. Such restrictions are
specific to each site and vary widely in scope and methods.
get <tftpurl>
where tftpurl is the name of the TFTP server and file to
retrieve.
put
Puts a configuration to the specified remote file or directory. If the
remote-directory form is used, the remote host is assumed to be a
UNIX* machine. Because the TFTP protocol has no user-logon or
validation, sites that support it typically enforce some file access
restrictions. Such restrictions are specific to each site and vary
widely in scope and methods.
Example:
put default.cfg to tftp://192.168.10.1/default.cfg
remove
Removes a configuration file.
remove <filename>
where filename is name of the configuration file to be removed
restore
NOTE: Username
commands are not valid in
configuration files, that is,
save config and restore
config operations do not
include username data. Use
the command
config
cli
username to restore
usernames.
Restores a CLI configuration from a previously saved file (see
save).
restore {filename}
where filename is the name of the configuration file to be
restored (the default file name is
default.cfg).
Command Description