HP Traffic Director Server Appliances sa7200/sa7220 and 8200/sa8220 - User Guide

C H A P T E R 5 CLI Commands
155
CLI
Commands
The Command Line Interface commands are described below.
Command Description
config
Changes the prompt to the CLI config branch.
config
config cli delete
Deletes the specified user.
config cli delete <username>
config cli info
Shows all current CLI settings at this level.
config cli info
config cli login-attempts
Specifies the maximum allowable number of failed login attempts
before closing the connection.
config cli login-attempts <tries>
where tries is a number from 1 to 30.
config cli more
Sets scrolling of the output display to one page at a time or to
continuous display.
config cli more [enable | disable]
where:
•
enable allows you to scroll one page at a time.
• disable results in continuous scrolling.
config cli port
NOTE: If you are logged in
using telnet, do not use this
command. Doing so will
change the port parameters
and you will be
disconnected.
Specifies the telnet port on which the CLI runs.
config cli port <port>
where port is a valid port. Valid ports are port 23 (the default) or
any unused port between 1024 and 65535.