HP Traffic Director Server Appliances sa7200/sa7220 and 8200/sa8220 - User Guide

C H A P T E R 5 Policy Group Commands
173
config policygroup
service server port msap
Enables or disables Multi-hop Source Address Preservation
(MSAP) on the named server.
config policygroup <policy-name> service
<service-name> server <server-name> port <port>
msap [enable | disable]
where:
•
policy-name is the name of an existing Policy Group
•
service-name is the name of the service
•
server-name is the name of the server
•
port is the server port
•
enable enables Multi-hop Source Address Preservation
•
disable disables Multi-hop Source Address Preservation
config policygroup
service server port type
NOTE: A backup server is
sent requests only under two
circumstances: First, when
the primary servers are
unable to meet the
configured target response
times a backup server is
used if and only if "backups"
is enabled for this service.
Second, backup servers are
given requests when a
primary server is
unavailable. As primary
servers become inactive,
backup servers are brought
into service to handle
requests.
Specifies the server type of the named server.
config policygroup <policy-name> service
<service-name> server <server-name> port <port>
type [primary | backup | disable]
where:
•
policy-name is the name of an existing Policy Group
•
service-name is the name of the service
•
server-name is the name of the server
•
port is the server port
•
primary specifies that this server is a primary server
•
backup specifies that this server is a backup server
•
disable disables the server
Command Description