sa8220 - User Guide

C H A P T E R 5 System Commands

175

System

Commands

The System commands are described below.

Command Description

config sys

Changes the prompt to the config/sys branch

config sys

config sys autoboot

Enables or disables the Autoboot function. If Autoboot is enabled,

the SA8220 prompts you to press a key during restart to enter the

Boot Monitor command line interface. If you ignore the prompt,

restart finishes with the SA8220 in normal operating mode. If

Autoboot is disabled, the restart sequence ends by displaying the

Boot Monitor interface. Autoboot is disabled by default. For

more details, please see “Boot Monitor” in Chapter 3.

config sys autoboot [enable | disable]

config sys hosts info

Displays the contents of the SA8220's host file

config sys hosts info

config sys hosts delete

Deletes the specified entry from the host file

config sys hosts delete <ipaddress>

config sys hosts add

Adds the specified IP address to the host file and associates it with

the specified hostnames. Hostnames are separated on the

command line by spaces.

config sys hosts add <ipaddress> alias

<hostname1> { alias2 <hostname> alias3

<hostname> alias4 <hostname> alias5 <hostname>

alias6 <hostname>