sa8220 - User Guide

C H A P T E R 6HP Traffic Director Server Appliances User Guide

216

2. To move the prompt to the level of the specific service, type this

command:

HP SA8220/config/policygroup/saptest#service sap

Add Servers to the SAP Service

1. To add the server “serv1” to the SAP service, type this command:

HP SA8220/config/policygroup/saptest/service/

sap#server create serv1.prime.com port 80

Server serv1.prime.com port 80 has been created.

This tells the SA8220 that serv1.prime.com can fulfill requests

arriving at 30.1.1.201 on port 80.

2. Move the prompt again by typing this command:

HP SA8220/config/policygroup/saptest/service/

sap#server serv1.prime.com port 80

3. To finish, type this command:

HP SA8220/config/policygroup/saptest/service/

sap/server/serv1.prime.com/port/80#mode sap

The mode sap command allows clients' addresses to be

forwarded to the server in place of the SA8220's address.