HP Traffic Director Server Appliances sa7200/sa7220 and 8200/sa8220 - User Guide

C H A P T E R 3 HP Traffic Director Server Appliances User Guide
52
host Sets the SA8220’s host name.
Example:
monitor>host
Enter the hostname you would like to assign to
the Network NIC: --->CSLab7k
info Displays the current boot configuration.
interface Configures Ethernet port parameters. Compatibility with some older
switches, hubs, or routers, may require that you manually specify the
Ethernet speed and duplex mode of the SA8220's network interface
card.
Single NIC configuration example:
Auto configure the network NIC speed and duplex
(yes,no)? [yes] --->no
1 - 100BaseTx
2 - 10BaseTx
Select Media Type (1 or 2): [1] --->
2
Use Full Duplex? [n] --->n
Dual NIC configuration example:
Auto configure the Network side NIC speed and
duplex (yes,no)? [yes] --->
Auto configure the Server side NIC speed and
duplex (yes,no)? [yes] --->
ip Specifies the SA8220's IP address.
Example:
monitor>ip
Enter the IP address for the Network side NIC
[10.6.3.21] --->
Enter the IP address for the Server side NIC
[10.6.5.21] --->