sa8220 - User Guide

C H A P T E R 3 Using the Boot Monitor CLI

load Loads a previously saved configuration file into memory.

Example:

monitor>load

Select a configuration file to load from the

following files.

File name

--------------

active.cfg

backup.cfg

cris.cfg

‘active.cfg’ is the last booted configuration.

Enter the configuration filename to load

(- to cancel): [active.cfg] --->

Configuration loaded: active.cfg

netmask Specifies the netmask.

Example:

monitor>netmask

Enter Netmask for Network side NIC

[255.255.255.0] --->

Enter Netmask for Service side NIC

[255.255.255.0] --->

rich-bias

(not available on the

SA7200)

Optimizes RICH_HTTP service performance. If your RICH_HTTP

service responses consist mostly of files greater than 8K, the enabled

(default) setting of

rich_bias will optimize performance. If your

site is experiencing performance problems and the RICH_HTTP

service responses are less than 8K, you may want to disable

rich_bias.

This command has no effect on SSL terminated connections.

Example:

monitor>rich_bias

Unit is currently ‘RICH_Biased’, change it

(yes, no) [no] --->

yes

RICH_Biased (enable, disable) [enable]

--->

disable