HP Traffic Director Server Appliances sa7200/sa7220 and 8200/sa8220 - User Guide

C H A P T E R 3 HP Traffic Director Server Appliances User Guide
54
save Saves the current configuration. Changes made during the current
Boot Monitor session are lost unless you use the
save command.
Example:
monitor>save
List of currently saved configuration file(s).
You may save over an existing configuration file
or enter a new name.
File name
-------------
active.cfg
bckup.cfg
cris.cfg
‘active.cfg’ is the last booted configuration.
Enter configuration file name (- to cancel):
[active.cfg] --->-monitor>
settime Selects a method for setting the SA8220’s system time and date. If
you select NTP, you will be prompted for the IP address of the NTP
server(s) you want to use. If you set the date manually, you will be
prompted first for the timezone, then for the date in 24-hour format.
Example, with NTP:
monitor>settime
Use NTP? [enable] --->
Enter IP address of NTP server or <return> to
end: --->
209.218.240.1
Enter IP address of NTP server or <return> to
end: --->
209.218.240.238
Enter IP address of NTP server or <return> to
end: --->
Example 1, without NTP (manual setting):
NOTE: Example 1 is for
setting the time using
Greenwich Mean Time
(GMT). For example, the
GMT-14 timezone is
GMT minus 14 hours.
monitor>settime
Use NTP? [disable] --->
Select TIMEZONEs to list (GMT, US, Other or q to
quit: [GMT] --->GMT