HP Traffic Director Server Appliances sa7200/sa7220 and 8200/sa8220 - User Guide

C H A P T E R 3 HP Traffic Director Server Appliances User Guide
58
static_routes Deletes and adds any number of static IP routes. Shows the current
static IP routes (if any) when the function is entered. You are
prompted for the destination and gateway IP addresses. The
info
command will show any static IP routes that are known to the Boot
Monitor, and
factory_reset will remove all static IP routes as
part of its cleanup.
Example:
monitor>static_routes
Static Route information.
Enter Static route (1) dest IP(- to del, q to
quit): --->10.7.16.5
Enter Static route (1) gate IP(- to del, q to
quit): --->10.8.15.40
Enter Static route (2) dest IP(- to del, q to
quit): --->10.7.18.50
Enter Static route (2) gate IP(- to del, q to
quit): --->10.8.15.40
Enter Static route (3) dest IP(- to del, q to
quit): --->q
{2} Static Route(s).
version Displays software version information.
Example:
monitor>version
Product: HP SA7220
Version: 2.4
Patch Level: 0.1
Build: 40