HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 4 Tools Screen
137
Ping
Ping tests the network connection to another networking device by
sending five ICMP packets from the SA8250 to the target device,
which if it receives them, sends a reply. When the SA8250 receives
the reply, it displays a message reflecting the response time from the
target device. If the SA8250 receives no reply, it displays a message
indicating that the target device is not responding.
To "ping" a network device:
1. From the Command menu, click ping.
2. In the Parameters field, type the host name or IP address of the
target device.
3. Click Run.
After a few seconds, the Ping information displays in the Results
window.
Ping Results
4. To clear the Results window, click Clear.