HP e-Commerce / XML director server appliance sa8250 - Users Guide

Command Line
Interface
CLI Introduction
The HP e-Commerce/XML Director Server Appliance SA8250 can
be fully configured using the Command Line Interface (CLI). The
CLI is accessible by using either the Telnet or the serial port.
Commands exist in a logical hierarchy.
Secure Shell
Support
The SA8250 provides secure shell (SSH) versions 1 and 2 support.
To use the secure shell:
NOTE: The secure shell
is available only when
administering the SA8250
over your network.
1. Launch your SSH client and connect to the SA8250’s IP address.
2. Log on to the secure shell using
admin for both the user ID and
password. You can use the
change_password command,
discussed in this chapter, to change the CLI password.