HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 5 CLI Commands
177
config cli port
Specifies the telnet port on which the CLI runs.
Note: If you are logged in using telnet, do not use this command.
Doing so will change the port parameters and you will be
disconnected.
config cli port <port>
where port is a valid port. Valid ports are port 23 (the default) or
any port between 1024 and 65535.
config cli prompt
Changes the root level prompt.
config cli prompt <prompt>
where prompt is the new prompt name. The default prompt is an
abbreviation of the product’s name, such as "HP SA8250." The
default prompt can be restored by entering "" (two double quotes
with no space between them) as the prompt name.
config cli screenlines
Specifies the number of lines in the output display.
config cli screenlines <nlines>
where nlines is the number of output lines (8 to 64, the default
is 23).
config cli telnet-
sessions
Sets the allowable number of concurrent inbound remote CLI
logon sessions.
config cli telnet-sessions <nsessions>
where nsessions is the number of allowed sessions (1 to 8, the
default is 3).
Command Description
CLI Commands (continued)