HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 5 HP e-Commerce/XML Director Server Appliance SA8250 User Guide
178
config cli ssh-port
Sets the Secure Shell (SSH) port number.
Note: If you are logged in using SSH, do not use this command.
Doing so will change the port parameters and you will be
disconnected.
config cli ssh-port <port>
where port is a valid port. Valid ports are port 22 (the default) or
any unused port between 1024 and 65535.
config cli timeout
Sets or changes the idle timeout period before automatic logout for
CLI sessions. This feature can be disabled by setting the timeout
value to "0."
config cli timeout <nseconds>
where nseconds is the timeout period in seconds (0, or 30 to
65535). The default is 900 seconds (15 minutes).
config cli username
Adds or changes the logon entry or password
config cli username <name> password <password>
level <ro | rw | rwa>
where:
•
name is the logon name (must be from 4 to 16 characters with
no spaces)
•
password is the password (must be from 4 to 16 characters
with no spaces)
•
level is the authorization level (ro = read only, rw = read
and write, and
rwa = read, write all).
Note: Username commands are not valid in configuration files,
that is, save config and restore config operations do not include
username data.
config cli users
View the logon and user levels for the different access levels.
config cli users
Command Description
CLI Commands (continued)