HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 5 Routing Commands
183
config route ospf-dead
Changes the duration of the OSPF router dead interval. The router
dead interval is the number of seconds the SA8250’s OSPF
neighbors should wait before assuming that this OSPF SA8250 is
down. This must match the router dead interval of the ingress
router. Valid range is from 1 to 2,147,483,647, and the default is
40.
Note: This value must be at least four times the hello interval.
config route ospf-dead <nseconds>
where nseconds is the number of seconds in the OSPF router
dead interval.
Command Description
Routing Commands (continued)