HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 5 System Commands
201
config sys id
Sets the unit identifier. The SA8250 is shipped pre-configured
with the unit’s serial number in this field. This command can
change the identifier if the site requires alternate asset tracking
information.
config sys id <identifier>
where identifier is an alphanumeric value from 1 to 64
characters.
config sys info
Displays all current system information
config sys info
config sys msd
Changes the prompt to the config/sys/msd branch
config sys msd
config sys msd info
Shows the current Multi-Site Agent information
config sys msd info
config sys msd port
Sets the Multi-Site Agent port
config sys msd port <port>
where port is an integer from 1 to 65535, and the default is 1999.
We recommend using available ports 1024 and higher.
config sys software
Changes the prompt to the config/sys/software branch
config sys software
config sys software boot
Select a software image and reboots the system under that image.
config sys software boot <index>
where index is a valid index of an installed software image, as
displayed with the
show sys software info command.
Command Description
System Commands (continued)