HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 6 SA8250 Scenarios
245
Prerequisites for Scenario 3
Equipment
• At least one Web server with an installed loopback adapter (for
example, UNIX* or Windows* or NT*)
• One SA8250 physically installed on the network, with its Boot
Monitor and routing protocol configurations completed. For
more information, see the Getting Started Guide.
Procedure for Scenario 3
Connect to the SA8250
1. Telnet to the SA8250's port 23 and log on as the administrator
(
admin).
The Command Line prompt displays:
HP SA8250#
Create a Policy Group
1. To create a policy group, first move the prompt to the policy
group level by typing this command:
HP SA8250#config policygroup
2. To specify the new policy group's name (“oprtest” in this
example), type this command:
HP SA8250/config/policygroup#create oprtest
policy group oprtest created.
3. To move the prompt to that level, type the new policy group's
name:
HP SA8250/config/policygroup#oprtest