HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 7 HP e-Commerce/XML Director Server Appliance SA8250 User Guide
274
Configuring
Other SNMP
Parameters
The following CLI commands are used to display and configure
general SNMP parameters:
config sys snmp info
config sys snmp port <port>
config sys snmp sysContact <string>
config sys snmp sysName <string>
config sys snmp sysLocation <string>
NOTE: You can also
configure these
parameters in the
Administration-SNMP
tab of the GUI interface.
SNMP port is used by the SA8250 SNMP to listen for SNMP
requests. By default, the SNMP port is 161. The SNMP port can be
changed to a number between 5020 and 65535.
sysContact, sysName and sysLocation correspond to the MIB
variables of the same name in MIB-II.
sysContact is the name of
the administrator of this SA8250. By default,
sysContact is
NULL.
sysName is the name of the SA8250. By default, sysName
contains the hostname of the SA8250.
sysLocation indicates
where the SA8250 is physically located. By default,
sysLocation
is NULL.