HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 8 Downloading and Installing the Software
277
Downloading and Installing the Software
NOTE: If you install the
same image as the
currently running image,
the system will
automatically reboot.
The process for downloading and installing the software is the same
whether the image is a version update or patch. After the install file is
on an ftp server, use the GUI or the CLI to download and install it
onto the SA8250. Although it is possible to install software while the
SA8250 is operating, we recommend that you configure a backup
SA8250 before installation to minimize your downtime. If no backup
is available, it is best to perform installations at off-peak times.
1. To install the image, type this command:
config sys software install
If you are installing a software version update, your unit is
already licensed to execute the update image.
This is an example of FTP download syntax:
NOTE: The example
shown here is for
illustrative purposes
only. Actual input is
unique to each
installation.
FTP software update (no key required)
config sys software install ftp://myftpserver/
dir1/dir2/install_Pivot.SA8250.2.3.0.0.221
user myftpuser password myftppw
Status information appears as the installation progresses. If the install
status information indicates that the installation failed due to an
incorrect URL, user name, or password information, verify this data
and reenter the command with the appropriate corrections.