HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 2 HP e-Commerce/XML Director Server Appliance SA8250 User Guide

NOTE: The Online IP

Address is the address

used by the SA8250 that is

currently accepting

connections — this can be

either the Primary or the

Backup SA8250 (though

it is typically the

Primary). The Online IP

Address is the address by

which you can access the

Online SA8250 using

telnet for administration.

4. For single NIC operation, follow the prompts as shown:

Set failover method (None, Serial, Route)

[ ] ---> serial

Checking for failover unit...

Failover unit not detected or may not be

configured.

Is this machine Primary or Backup? [Primary]--->

Enter the Network’s Online IP Address

--->10.6.3.200

Enter Network’s Online Hostname ---> netonline

Serial failover successfully configured

If Dual NIC operation is enabled, failover configuration looks

like this example:

monitor>failover

Set failover method (disabled, serial, route)

[disabled] --->serial

Disabling DHCP to allow serial failover.

Checking for failover unit...

Failover unit not detected or may not be

configured.

Is this machine Primary or Backup? [Primary]--->

Enter the Network side Online IP Address

[10.6.3.200] --->

Enter the Server side Online IP Address

[10.6.4.200] --->

Enter the Network side Online hostname

[netonline] --->

Enter the Server side Online hostname --->

servonline

Serial failover successfully configured