HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 2 Serial Cable Failover
57
5. Boot the SA8250.
monitor>boot
... current configuration ...
... list of saved configuration files ...
Boot configuration file name? [active.cfg]
---> <Enter>
Do you really want to boot ‘active.cfg’? [y]
---> <Enter>
Please stand by, the system is being booted.
Replicating the Configuration
The active configuration is replicated upon changes to the Backup
SA8250 from the Primary. For most configurations, faults are
detected within 3 seconds, and the Backup is fully online within 25
seconds. The latter interval increases as the number of services
increases.
Status Information
You can display information about the SA8250s’ function and
failover status either via the Command Line Interface or the GUI.
Below are the commands to display status information followed by a
list of status messages and their explanations.
1. Log in to the SA8250.
2. At the CLI prompt, type this command:
HP SA8250>info