HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 3 Using the Boot Monitor
65
Service side NIC:
IP Address 10.6.5.21
Netmask: 255.255.255.0
MAC address: 0:d0:b7:6:c1:85
-------------
Default Gateway: 10.6.3.1
Domain: None
Primary name server: None
DHCP: Disabled
Failover mode: Disabled
Network NIC setup: Auto
Server NIC setup: Auto
NTP: Disabled
Autoboot: Disabled
Static Routes: None
RICH_Biased: Enabled
The configuration has changed, save it? [y] --->
First Options:
1. If you accept the default,
y, the system saves the configuration as
either
active.cfg or the last loaded filename.
Configuration file name? [active.cfg] --->
NOTE: This list includes
backup.cfg, a backup
of the most recently
booted configuration.
This file is automatically
created when you change
the configuration and
save.
2. You can either accept the default,
active.cfg, or enter a new
filename. The system then saves the file and presents a list of all
saved files.
Select a boot configuration from the following
files.
active.cfg
backup.cfg
Boot configuration file name? [active.cfg] --->
3. You can accept the default, active.cfg, or select another
previously saved configuration. No matter which file you select,
the configuration file you are about to boot is displayed to ensure
that the last file displayed is the configuration that is booted.
4. If you accept the default,
y, the system boots to the normal
operational prompt, if you type
n, it returns to the monitor>
prompt.