HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 3 Using the Boot Monitor
71
host Sets the SA8250’s host name.
Example:
monitor>host
Enter the hostname you would like to assign to
the Network NIC: --->CSLab7k
info Displays the current boot configuration.
interface Configures Ethernet port parameters (replaces the
nic command).
Compatibility with some older switches, hubs, or routers, may
require that you manually specify the Ethernet speed and duplex
mode of the SA8250's network interface card.
Single NIC configuration example:
monitor>interface
Auto configure the network NIC speed and duplex
(yes,no)? [yes] --->no
1 - 100BaseTx
2 - 10BaseTx
Select Media Type (1 or 2): [1] --->
2
Use Full Duplex? [n] --->n
Dual NIC configuration example:
monitor>interface
Auto configure the Network side NIC speed and
duplex (yes,no)? [yes] --->
Auto configure the Server side NIC speed and
duplex (yes,no)? [yes] --->
ip Sets the SA8250's IP address.
Example:
monitor>ip
Enter the IP address for the Network side NIC
[10.6.3.21] --->
Enter the IP address for the Server side NIC
[10.6.5.21] --->