HP e-Commerce / XML director server appliance sa8250 - Users Guide

C H A P T E R 3 Using the Boot Monitor
73
save Saves the current configuration. Changes made during the current
Boot Monitor session are lost unless you use the
save command.
Example:
monitor>save
List of currently saved configuration file(s).
You may save over an existing configuration file
or enter a new name.
File name
-------------
active.cfg
bckup.cfg
cris.cfg
‘active.cfg’ is the last booted configuration.
Enter configuration file name (- to cancel):
[active.cfg] --->-Configuration save canceled!
settime Set the SA8250’s system date and time. If you select NTP, you will
be prompted for the IP address of the NTP server(s) you want to use.
If you set the date manually, you will be prompted for the date in 24-
hour format.
Example, with NTP:
monitor>settime
Use NTP? [enable] --->
Enter IP address of NTP server or <return> to
end: --->
209.218.240.1
Enter IP address of NTP server or <return> to
end: --->
209.218.240.238
Enter IP address of NTP server or <return> to
end: --->
Example 1, without NTP (manual setting)
NOTE: Example 1 is for
setting the time using
Greenwich Mean Time
(GMT). For example, the
GMT-14 timezone is
GMT minus 14 hours.
monitor>settime
Use NTP? [disable] --->
Select TIMEZONEs to list (GMT, US, Other or q to
quit: [GMT] --->GMT