RAID User Guide
Table Of Contents
- Introduction
- RAID technology overview
- Operating systems and devices supported
- Intel Rapid Storage Technology features
- RAID volume setup
- Resetting RAID drives to non-RAID
- Frequently asked questions
- Can more than one RAID volume be installed on a computer?
- Is RAID supported to allow both RAID 0 and RAID 1 on a single RAID volume?
- Can the computer be undocked if the recovery HDD is in the docking station SATA-swappable bay?
- What are the maximum number of HDDs that can be connected to the system during boot when the storage ...
- Index
Initiate RAID migration using Intel Rapid Storage
Technology Console
▲
Open the Intel Rapid Storage Technology Console by selecting Start > All Programs > Intel
Rapid Storage Technology.
NOTE: Windows Vista and Windows 7 include the User Account Control feature to improve the
security of your computer. You may be prompted for your permission or a password for tasks
such as installing software, running utilities, or changing Windows settings. Refer to Help and
Support for more information.
The console starts at the Status screen, and displays the current status and the hard drives in
the system.
Initiate RAID migration using Intel Rapid Storage Technology Console 15