RAID User Guide
Table Of Contents
- Introduction
- RAID technology overview
- Operating systems and devices supported
- Intel Rapid Storage Technology features
- RAID volume setup
- Resetting RAID drives to non-RAID
- Frequently asked questions
- Can more than one RAID volume be installed on a computer?
- Is RAID supported to allow both RAID 0 and RAID 1 on a single RAID volume?
- Can the computer be undocked if the recovery HDD is in the docking station SATA-swappable bay?
- What are the maximum number of HDDs that can be connected to the system during boot when the storage ...
- Index
3. Update mode displays the current setting. To change the current setting, click the Change Mode
link, and then click Yes. When using the on-request update policy, you can manually update the
recovery volume by selecting the Update Data link.
4. You can restore the continuous update policy at any time by selecting the Change Mode link,
and then clicking Yes.
36 Chapter 5 RAID volume setup