RAID User Guide
Table Of Contents
- Introduction
- RAID technology overview
- Operating systems and devices supported
- Intel Rapid Storage Technology features
- RAID volume setup
- Resetting RAID drives to non-RAID
- Frequently asked questions
- Can more than one RAID volume be installed on a computer?
- Is RAID supported to allow both RAID 0 and RAID 1 on a single RAID volume?
- Can the computer be undocked if the recovery HDD is in the docking station SATA-swappable bay?
- What are the maximum number of HDDs that can be connected to the system during boot when the storage ...
- Index
3. Press the space bar to select the first drive, and then press the down arrow key and the space
bar to select the second drive.
4. Press enter, and then press Y to confirm the selection.
5. Use the down arrow key to select Exit, and then press enter and Y to boot the system.
38 Chapter 6 Resetting RAID drives to non-RAID