HP StorageWorks Enterprise Modular Library E-Series Getting Started (AD560-96030, September 2007)

CAUTION! Handle tape cartridges with care. Do
not drop or mishandle them, or place them near
sources of electromagnetic interference. Rough
handling can damage the tape cartridge making
it unusable and potentially hazardous to the tape
drives.
CAUTION! The misuse and misunderstanding of
bar code technology can result in backup and
restore failures. To ensure that your bar codes
meet HP’s quality standards, always purchase
them from an approved supplier and never print
bar code labels yourself. For more information,
see the order form provided with the library,
as well as the Bar Code Label Requirements,
Compatibility and Usage white paper available
from http://www.hp.com/support.
Attach the bar code labels
to the tape cartridges
14
Attach a bar code label to each tape cartridge. Orient
the bar code label as shown and place it entirely within
the recessed area.
Insert the tape cartridges
into the slots
15
At the front of the library, insert the tape cartridges into
the slots on the side and rear walls inside the library.
0
0
0
2
2
0
L
3
IMPORTANT! The robot cannot access tape cartridges in
the bottom one or two rows of the bottom module in the
library. If the bottom module is a tape drive expansion
module or capacity expansion module,, do not insert
tape cartridges into the bottom row. If the bottom
module is a base module or card cage expansion
module, do not insert tape cartridges into the bottom
two rows.
Power on the library
16
Close the center door of the library and turn the center-
door knob one-quarter turn clockwise to lock it.
0 0 0 2 2 0 L3
0 0 0 2 2 0 L4
LTO2
LTO3
LTO4
Labels: