HP StorageWorks Enterprise Modular Library E-Series Getting Started (AD560-96069, May 2010)

2. e2400–FC 2Gb interface con-
troller
1. Library robotics controller
4. Interface Manager card3. To hosts
6. Tape drives
5. To management station, via
customer LAN
Figure 2 LTO3 tape drives and e2400–FC 2Gb interface controller
.
2. e2400–FC 4Gb interface con-
troller
1. Library robotics controller
4. Interface Manager card3. To hosts
6. Tape drives
5. To management station, via
customer LAN
Figure 3 Library with LTO3 tape drives and e2400–FC 4Gb interface
controller
.
12 Attach the bar code labels to the tape
cartridges
CAUTION:
Handle tape cartridges with care. Do not drop or mishandle
them, or place them near sources of electromagnetic
interference. Rough handling can damage the tape cartridge
making it unusable and potentially hazardous to the tape drives.
CAUTION:
The misuse of bar code technology can result in backup and
restore failures. To ensure that your bar codes meet HP’s quality
standards, always purchase them from an approved supplier
and never print bar code labels yourself. For more information,
see the order form provided with the library, as well as the Bar
Code Label Requirements, Compatibility and Usage white paper
available from http://www.hp.com/support.
Attach a bar code label to each tape cartridge. Position the bar code
label as shown and place it entirely within the recessed area.
13 Insert the tape cartridges into the slots
At the front of the library, insert the tape cartridges into the slots on the
side and rear walls inside the library.
Page 4