HP StorageWorks Enterprise Modular Library E-Series Getting Started (AD560-96069, May 2010)

Identifying the parts of the library
2. Base module
1. Customer reserved space. If
your library contains LTO4 or
LTO5 tape drives, this space con-
tains the switch for the internal
network
4. Card cage expansion module3. Tape drive expansion module
6. Robotics unit5. Capacity expansion module
8. Operator control panel (OCP)7. Viewing windows
10. 4U blank covers9. 5-Cartridge load port
11.10-Cartridge load ports
2. Switch for internal network (in
libraries with LTO4 or LTO5 tape
drives only)
1. Customer reserved space.
4. Card cage expansion module3. Base module
6. Capacity expansion module5. Capacity expansion module
8. Base module card cage7. Main power switch
10. Cable management features9. Tape drives
12. Power supplies11. Fans
14. Power distribution unit (PDU)13. Power strips
Getting help
• HP product information
http://www.hp.com/go/storage
• HP technical support and phone numbers:
http://www.hp.com/support
• HP manuals:
http://www.hp.com/support/manuals
• HP StorageWorks Library and Tape Tools (L&TT) diagnostic software:
http://www.hp.com/support/tapetools
• Interface Manager and HP StorageWorks Command View TL:
http://www.hp.com/support/cvtl
Page 7