HP StorageWorks Enterprise Modular Library E-Series 71e Getting Started (AH876-96002, October 2007)

Install the 8U base module

Using two people, lift the 8U base module into position

in the rack. The two tabs on each side of the 8U base

module fit over the rails. Slide the 8U base module half

way into the rack.

At the rear of the library, guide the notches on the

bottom corners of the 8U base module onto the

mounting brackets. Slide the 8U base module

completely into the rack.

At the front of the library, turn the center-door knob one-

quarter turn counterclockwise and open the center door

of the library.

WARNING! The 8U base module weighs 27 kg

(60 lb). Use two people and a cart, tabletop, or

mechanical device to lift, position, and secure

the 8U base module.

CAUTION! The door locking lever must be down

before you install the robotics unit.

Keep the center door open and turn the center-door

knob one-quarter turn clockwise to lower the door

locking lever on the top of the door.

NOTE: Your library might look different.