HP StorageWorks Enterprise Modular Library E-Series 71e Getting Started (AH876-96002, October 2007)

Install the 4U base module
14
Attach the 8U base module to the front of the rack
with four T-25 panhead screws.
12
Lift the 4U base module into position in the rack. The
top of the 4U base module has rails on each side that
fit into the L-flange of the module above. The right rail is
longer than the left rail, and will engage first, making
the left side heavier until the module is completely on
both rails. Starting with the right side, place the 4U
base module on the L-flange of the 8U base module
and slide it until it is half way into the rack.
15
Close the load port door on the 8U base module.
13
WARNING! The 4U base module weighs 12 kg
(27 lb). Be careful when lifting. Use a cart,
tabletop, or mechanical device to lift, position,
and secure the module.
Open the load port door on the 8U base module.
Inside the front of the library, press the load port door
latch to open the load port door.
11
Remove the cover from the left side of the 4U base
module. To remove the cover, loosen the bottom
thumbscrew.
8U base module
4U base module