HP StorageWorks Enterprise Modular Library E-Series 71e Getting Started (AH876-96002, October 2007)

Make sure the robotics unit is properly installed:
The guide rail fits into the alignment slot.
The tabs on the bottom of the door of the robotics
unit are behind the faceplate.
The latch on the door of the robotics unit is fully
engaged and secure.
The latch on the right side of the robotics unit is fully
engaged and you cannot move the robotics unit.
The ratchet tool on the upper-right corner of the
robotics unit is pushed in completely.
35
Push the cover onto the robotics unit.
1
3
4
2
5
Make sure the latch on the right side of the robotics unit
is fully engaged. If it is not, push the latch to the right.
You should not be able to move the robotics unit. Close
the door of the robotics unit.
1 Guide rail in alignment slot
2 Tabs on door
3 Latch on door
4 Latch on right side of robotics unit
5 Ratchet tool
1
2
3
33
At the front of the library, insert the robotics unit most of
the way into the top of the library. Push the latch on the
door of the robotics unit to the right and open the door.
Push the robotics unit the rest of the way into the library.
Latch
36
34