HP StorageWorks Enterprise Modular Library E-Series 71e Getting Started (AH876-96002, October 2007)

37
Attach the brackets to the switch.
Install the switch for the
internal network
41
42
40
38
Connect the power cord to the power socket on the
back of the switch.
Insert the switch into the library. Attach the switch to the
rack with the screws.
41
Route the power cord and plug it into a power strip.
At the rear of the library, install two clip nuts in the
center hole of the 1U location above the robotics unit.
CAUTION! Do not connect this switch to your
local LAN. It is for internal library communication
only. Connecting this switch to a LAN could
cause library components to perform incorrectly
or report failures.
39
40