HP Ethernet Network Interface Card hn230e - (English) Quick Start Guide

Ethernet network interface card
7
Filename: QS Ethernet NIC.doc Title: HP-Print2k.dot
Template: QS Phoneline GW.dot Author: Rob Heiret Last Saved By: Elizabeth Stoneburg
Revision #: 65 Page: 7 of 12 Printed: 09/04/01 05:48 PM
2 The New Hardware Wizard cannot find the
driver for the Ethernet card.
■
You are probably on a window that
reads: “Windows was unable to locate
the software for this device….” Click
Back as instructed. Be sure the CD-ROM
is inserted in the CD-ROM drive of your
computer and that the CD-ROM drive
option checkbox is checked. Click Next.
The wizard should locate and install the
correct driver.
3 The card and driver are installed, but I can’t
connect to the network.
■
Verify that your computer is properly
configured to work with your network (see
the documentation for your Gateway,
router, switch, or hub).
specifications
Model Number: hn230e
Standards: IEEE 802.3 (10BaseT)
Connectors: RJ-45 (10BaseT)
Ports: 10BaseT
Bus Characteristics: 32-bit; PCI Local Bus
Specification 2x
RAM Buffer: 16 KB
Dimensions: 4.72” x 2.36”
Power: 430 mA at 5 v
Certifications: FCC Part 15, Class B
Operating
Temperature:
0° C to 55° C
(32° F to 131° F)
Operating Humidity:
10% to 90%
noncondensing