6625 Disk Enclosure Installation Instructions (5697-1395, December 2011)

Cabling the P6300 EVA enclosure while offline

1. Power down the array.

Figure 9 (page 8) shows the cabling for an array with one P6300 EVA controller enclosure and

two disk enclosures.

Figure 9 Cabling for preexisting P6300 EVA

2. Figure 10 (page 8) shows the cabling when two disk enclosures are added to the array as an

offline upgrade. Unplug the cable between DP-B (Red) on controller 1 and I/O module B port P2

of the existing disk enclosure at the bottom of the rack. Connect the cable from DP-B (Red) on

controller 1 to I/O module B port P2 on the newly installed disk enclosure closest to the controller

enclosure (1, Figure 10 (page 8)) (the newly installed disk enclosures are the top two).

Figure 10 Adding disk enclosures to the P6300 EVA

8 Cabling the enclosure