HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 3.110) (5697-8108, March 2009)

5. Click the SAN Settings tab and enter the following information.
a. Enter a name in the SAN Name box. You can use the default SAN Name, but HP recommends
that you change it to a name that is meaningful to you. This name is used when generating
reports, so it should be one that is easily recognized as being associated with the SAN on
which data collection will be done.
b. Click Rename.
c. Click Yes to confirm the name change.
d. Enter a name in Switch Group Name. You can use the default fabric name, but HP
recommends that you change it to a name that is meaningful to you. This name is used when
generating reports, so it should be one that is easily recognized as being associated with
the fabric on which data collection will be done.
e. Click Rename.
f. Click Yes to confirm the name change.
HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS
3.110) 25